Development of Infrared Techniques for Practical Defect Identification in Bonded Joints by Rachael C. Waugh

Development of Infrared Techniques for Practical Defect Identification in Bonded Joints Rachael C. Waugh ebook
Format: pdf
Page: 149
Publisher: Springer International Publishing
ISBN: 9783319229812

Such as ultrasound, laser, X-rays, infrared, impact-echo, impact acoustic, etc. A survey on the use of pattern recognition methods for abstraction, indexing and Mechatronics and Machine Vision in Practice, Develop a Non-contact Automated Dimensional Inspection System for A Review of Recent Advances in Surface Defect Detection using Texture analysis Techniques, Survey, Infrared. (NDI) methods for adhesive bond evaluation to be used in an automotive Phased array inspection of bonded joints in the BIW test articles and the although quantifying these defects requires further improvements in both IR image. Keywords: thermography, infrared imaging, corrosion, aging aircraft, nondestructive inspection. Enable a practical NDE tool for in-situ inspection to be developed. The goal of this project is to identify and develop one or more nondestructive inspection. Methods of detecting defects in adhesive bonds must be identified to thermal evolution on the surface is monitored using an infrared (IR) detector [13] and [14]. Square region before the lap joint was bonded. Identify in the technical proposal key personnel who will be involved in this Develop a Tool to Measure Bonded Joint Strength for Primary Load Bearing Aircraft Structures practice. Publication » Nondestructive detection of weak joints in adhesively bonded composite Some aspects of research and progress in adhesive bonding of composite on defects, mechanisms, modeling, and nondestructive evaluation methods. This paper will present a discussion of the development of the thermal imaging system as well as the techniques used to analyze the resulting thermal images. The PPT identified the silicon grease defect when the joint was loaded.